VENT Systems Roll Panel Vent– G502

Drawings

1. Sarking/Membrane Above Roof Battens​
2. Sarking/Membrane Below Roof Battens
3. Renovation Details

Technical Documentation

​The VENT Systems Roll Panel Vent – G502 is designed to maintain a continuous 25mm air gap between the underside of the roofing membrane or sarking and loft insulation at the eaves, providing a consistent flow of air into the roof space.

The G502 castellated profile is laid across the top of the roof trusses/rafters parallel with the eaves level and is suitable for both new build and roof renovation projects. The extra width of the panel allows for better coverage when low pitch and deep insulation details are encountered.

The G502 ensures that energy efficiency is not compromised by enabling insulation to installed above the wall plate.

The G502 should be used in conjunction with other specified VENT System products to create a calculated, continuous and unimpeded airflow system.

Please see VENT Systems Technical details for further information

Note: Consult AS3959 before installing the VENT System products in bushfire zones.

Products distributed by TCL Hoffman, available through:

Mitre 10