VENT Systems Ridge Vent Deep Trough – RV10DT


1. Sarking/Membrane Above Roof Battens​
2. Sarking/Membrane Below Roof Battens

Technical Documentation

The VENT Ridge Vent Deep Trough – RV10DT is designed to release warm air from the roof void using the natural convection of rising warm air or by means of negative pressure created by wind blowing over the roof. The RV10DT releases airflow of 8,000mm² per linear metre. The RV10DT has an adhesive and flexible aluminium flashing which is designed to form to roofing profiles and prevent water ingress on any pitch roof.

The RV10DT form part of a passive ventilation system that works year round with no moving parts or energy consumption.

The RV10DT is designed to be compatible with roof cladding profiles with a trough depth of >38mm

The RV10DT should be used in conjunction with other specified VENT System products to create a calculated, continuous and unimpeded airflow system.

Please see VENT Systems Technical details for further information

Note: Consult AS3959 before installing the VENT System products in bushfire zones.

Now BRANZ Appraised